CLXDB-250
铝门窗重型自动排料调刀端面铣床 (四刀 )
Heavy Duty Auto End-milling Machine for Aluminum Door and Window
设备特点: Equipment Features:
-用于铝型材端面的铣削加工,以满足中梃与框料的配合。 -Milling the aluminum mullion profile to connect the mullion profile and frame profile. -可一次铣削多根型材,效率高。 -Can mill many profile in one time with high productivity. -刀具可作上下、左右调整以适应不同形状尺寸的加工。 -Milling Knives can be adjusted up/down and left/right to meet different type of profile. -因刀具可调,在加工不同型材时,不必订制刀具,从而缩短生产准-Milling knives are adjustable for milling different profile, without special made knives
备、周期和降低成本。 to save the production time, reduce the production cost. -刀具直径大,切割速度高,加工面质量好。 -Large diameter of milling knives, high speed milling, good quality milling profile surface. -电路系统中安装了电动机相序保护器,提高了系统的安全性。 -Adopted the electrical motor protect device to improve the safety.
主要规格及技术参数
Main Specification and Technical Parameter
CLXD-200CLXDB-250 CLXDB-250A 输入电源 电机总功率 电机转速 气源工作压力 铣刀主轴直径 铣刀直径 锯片直径 工作台进给行程 工作台尺寸 可装铣刀高度 电机调整行程 定位板旋转角度 开榫最大尺寸 外形尺寸 切割型材粗糙度 重量 Power supply Total power Motor rev Air pressure Diameter of main shaft Diameter of milling cutter Diameter of blade Workable journey Worktable dimension Milling cutter height Motor adjustable journey Turning angle of location board Max processing tenoningsize Contour dimension Cutting surface roughness Weight 380V 50Hz 8.8KW 2800r/min 0.5-0.8MPa φ32mm φ250mm φ305mm 0-1560 mm 530×320 mm / 0-85 mm / 40 mm 3000×970×1670 mm 12.5μm 约650kg 380V 50Hz 6.6KW 2800r/min 0.5-0.8MPa φ32mm φ250mm / 0-1050 mm 530×320 mm / 0-85 mm / 40 mm 2400×970×1670 mm 12.5μm 约550kg 380V 50HZ 1.5KW 2800r /min 0.5-0.8MPa ф32mm ф110~ф200mm / 0~320mm 500×350mm 70mm 0~80mm 0~55° 70×45×200 mm 850×740×1280mm(L×W×H) Ra12.5μm 约300kgpage |